Tag Archives: Boat Book Tour 2017

One Week Till Launch

I’ve got one week until Katie and I set sail from Troy to Manhattan on my book tour. I need to finish the boat, connect with the media, and finalize the schedule with the businesses at which I’m stopping. I just started to remember, today, what the last week before a raft trip used to feel like. There are lots of problems, and I’m not totally sure that everything will work out. But it feels exhilarating.

I decided to ditch the gas motor. It always felt like cheating, since I’d never used a gas motor on the trips that my book is about. Or, it felt like I was getting old, because I never worried about a gas motor when I built boats before. And if you read the previous post, you know the motor was 60 years old, it was hard to start, and it had a gas tank that the boating blogs warn poses an EXTREME EXPLOSION HAZARD. I was spending too many hours fiddling with the thing every day, when I should have been focusing on something I already know how to do (more or less), which is to wire together a bank of deep cycle batteries and hook them up to the two windmills I had on Assembly Required, the boat that I sailed to Manhattan in 2010.

Assembly Required, 2010, the day we installed the windmills.

Next I decided to ditch the idea of taking the boat apart into pieces and shipping it in the back of a pickup truck whenever I wanted to drive it from place to place. It was a good idea back in February, but the pieces were heavy, and required two people spending an hour to put the boat together whenever I wanted to work on it, and then a half-hour to take it apart again. Instead, I decided I’d get a trailer, put the boat together on top of it, and then I could work on painting it, wiring it, and building a structure on top to protect from the weather, without wasting time whenever I had 3 hours to go to New Baltimore to work on the vessel before I had to drive back to Albany to go to work.

So I drove to New Baltimore and Katie, my dad and I put the boat together in the yard. This time we used bolts but I put a whole bunch of screws through it too, so that the boat is really one piece now. To attach the platform to the canoes I crawled under the boat and tied the platform’s joists to the cross-beams of the canoes. Katie and Dad were unsure this would be a sturdy enough connection, but I knew from building Mother of Inventions in 2009 that rope is a really great medium for connecting hulls to platforms. They can take a lot of stress without snapping.

The boat finally connected into one structure.

The bow of the platform floats between the two canoes, as does the back of the boat. I wanted to support the bow so I could stand on it. Also, I didn’t want the canoes to shift or pizza-slice like a person trying to slow down on skis–the canoes have to stay exactly parallel. So I tied a rope through the loops at the fronts and backs of either canoe, to a bolt with two eyelets on either side, which when screwed together, adds tension to a line.

Connecting the canoes at bow and stern to one another.

After screwing in a set of oar locks, the next step was to lift the boat onto a trailer. My friend Jake had dropped his trailer off early in the morning, but he’d to leave to help demolish a house. So it was up to me, Dad and Katie to get the boat, which now weighed about 500 pounds, onto the trailer before Jake came back, so we could take the boat to the river that night and test it out. Getting The Manhattan Project (2007) and Assiduity (2009) onto trailers required cranes and 20 people, respectively. But this boat is much smaller. My father and I were able to lift the front of the boat while Katie slid a 12-foot 2×4 underneath, so we could hold it better. We then rested the 2×4 on higher and higher piles of lumber until we could back the trailer underneath the bow. Then I put a series of pipes under the bow on top of the trailer, and Dad and I lifted from behind and rolled it forward. This was how we rolled the bridge off of Assiduity 16 feet in the air when we had to move that monstrosity to the river in 2009.

The boat partially loaded onto the trailer. The trailer is 10 feet long and the boat is 16, so it hung off the bat quite a bit.

By 2 p.m. we’d gotten the boat permanently put together and onto the trailer. Jake was not due back to tow the boat to the river until 7 p.m. It was at this point that I saw a big difference in my Dad, compared to years ago. Back when I was building rafts, as I describe in my book, Dad used to joke about how silly I was, how I was ruining his yard, messing up his driveway, and wasting my time. My dad read my book about those adventures, and told me he didn’t like the way I’d described him, like an adversarial figure. I didn’t really know how to respond to that, because I know he wasn’t trying to be adversarial, but that was how he seemed to me, then. Well, now Katie and I rested on the boat and Dad sat on the stone wall that’s waist high across the driveway by the hill below the house. We were trying to figure out what to do next. Suddenly, he stood and asked, “Do you want me to drive over to Glen’s [our mechanic in Hannacroix] and see if he has my trailer hitch?” Dad and Mom had bought a newer truck which did not have a hitch attached, and Dad was waiting for the mechanic to fix the flat tire on the wood-splitter, and he was going to install the trailer hitch, which would only take a second to install, while Dad happened to be out there to get the wood-splitter (whenever that happened). “I’ll go over. What the heck. We gotta try out the thing sooner or later, right?”

“If you want to go over to Glen’s and get the trailer hitch, and use it to take Jake’s trailer to the river sooner rather than later, I’m down for that! I just don’t want to inconvenience you or anything with the truck. I’d really like to get this thing to the river as soon as possible.”

“It’s nothing,” my dad said, and took off to get the trailer hitch so we could finally try out the boat that I’d been designing and building since April or something like that. I didn’t feel total relief, but I felt partial relief because the solution to one problem–how to tow the boat conveniently–was largely solved. I could borrow my Dad’s truck, or he could drive.

Once Dad came back with the truck hitch it was a simple matter to hook up the trailer, then Katie and I followed behind as he and Mom drove up to Coeymans Marina. Katie and I veered off in order to drop my car at Barren Island, then we met my parents by the docks in Coeymans. This was the easiest transport of one of my boats to the river yet. We simply backed the boat down the launch until the trailer’s wheels almost touched, and the overhanging canoes licked the water. Then I untied the boat, lifted the bow off the trailer, and she slid right in.

Well, we tied the boat up to the dock and loaded the oars, the marine battery, the trolling motor and our life jackets. In a tupperware “dry box” we kept our keys and cellphones. While Katie, Mom, Dad and I stood on the dock, I did a little dedication ceremony. I threw a pocketful of coins onto the deck, popped a bottle of champagne, poured the first three libations to Poseidon, poured a little over the deck, and I named her “TL” — short for That’s Life.

It was obvious that she wasn’t taking on any water and that the whole deck held together well. She only drew about 6-inches of water, just about what a canoe would normally draw. My dad was surprised because he thought the extra weight of the deck and battery would push the canoes under water. Katie was visibly relieved because she has been in a canoe only about four times, and of course a singular canoe threatens to tip whenever you shift your weight. But when we got aboard she saw that the two canoes cancelled each other’s tipping motion, and that it would be very difficult to capsize the boat (more difficult than it would be to capsize a V-hulled boat like a speedboat or a sailboat, whose ballast must be kept below water level). We only had about two hours of daylight left, and I wanted to test the boat out and tie her up in Colewell Cove, on Barren Island, where Jake had planted a dock and moored his sailboat. So Katie and I boarded and waved goodbye to my parents. I hooked the electric motor to the battery and turned her on. We started moving downstream on half-power at about 3 mph, which is just below the boat’s cruising speed of about 4 mph. I remarked to Katie that it had been seven years, but I was now I was the captain of a boat again!

There is a point on Bannerman Island that makes a peninsula and cuts off the view of Coeymans from downstream. On our first raft it took us nearly 45 minutes to pass this point. On our later boats with oars it took us about 12 minutes to pass this point. On this night, with the water like glass, and no wind, and the perfectly streamlined hulls and an electric motor, we reached the point in 5 minutes, before my parents had pulled away from Coeymans in their truck.

We finally get the boat on the water.

It was mid-August and this was the first time Katie and I had been out on a canoe the whole year. We had the bottle of champagne to pass back and forth. So we decided to motor south to the beach at the southern side of the bay formed where the Hannacroix Creek meets the Hudson, a mile downstream. Katie watched her first three barges pass in close proximity. I told her,

“You’d think we have to worry about the wakes from barges, but they’re not so bad. Their wakes come at you slow and rolly. All you’ve got to do is turn and face them, and they’re over in a couple of seconds.” We turned and rode the wake of a barge and it was no problem. “It’s the speedboats that you have to watch out for. When the go by at 40 miles an hour, their wake comes flying out, and they’re bigger and less predictable than the wakes of the barges.”

In Hannacroix Cove, with Barren Island to the north behind me.
Katie in Hannacroix Cove.

You can tell it’s low tide because the littoral grass and lily pads are protruding from the water almost out to the channel. After we made our stop, we motored back up to the north side of Barren Island. I brought us to shore and we carried a canoe down from a hill where Jake keeps it. We put this on the boat, then motored out to the dock where Jake has his sailboat. We tied up TL, then canoed back to the land, where there’s a path through the woods which led to where we’d dropped off my car. I took a final picture of the boat tied to the dock next to Jake’s 30-foot sailboat. It’s grainy because I had to zoom in with my camera. All the lights and cranes behind are the works they’ve built just north of Coeymans. None of that existed when I was taking rafts down the river. We stowed one of our rafts where the tanker is moored in the picture below, because the whole place was an abandoned brick plant with some falling-down sheds.

The next day was Monday and I had a book event up in Dana Park in Albany, the Monday Night Concert Series. It is the little park next to Lionheart in the triangle formed by the intersection of Lark Street and Delaware Ave on Madison Avenue. I spent three hours there, and made a profit of $5. But I feel like every movie you watch about some comedian or singer has a scene at the beginning, when they’re just starting out, and they are performing at some hole-in-the-wall place with about two customers, one of whom is heckling them. So I didn’t resent being there–in fact I was honored to be asked to attend. I was adding to my starving artist creds. While I was there, the publisher of Boating on the Hudson Magazine, John Vargo, emailed me a proof of the cover of the September issue. Boating on the Hudson is a free magazine; 6,000 copies are distributed each month between Lake Champlain and Manhattan, and he put a picture of me and my book on the cover with the caption “The Next Hemingway.” That sure felt good, especially since Hemingway was one of the main authors I emulate in my writing (the first chapter of my book, which uses driftwood as an epic simile, is a nod to the first chapter of A Farewell to Arms, which uses falling leaves as an epic simile).

I didn’t have a lot of time to go down to check on the boat over the next week (August 14-20), because I worked every night, and every day I had to email restaurants, breweries, bookstores and marinas about the book tour. Sometimes in the serving industry you have the option to leave early if business is slow, but for two weeks I couldn’t leave early because I needed the cash so badly to order copies of the books, which take a couple of weeks to be printed and mailed, for the book tour. 20 copies of Volumes I and II cost $290, and I wanted to have 100 on hand before I set sail. So I definitely had to work every night, and still transfer $600 from my line of credit to get the books. The worst thing I can picture would be to have people show up to buy my books at an event, and I am sold out. So eight days went by and I didn’t have a day to go down to New Baltimore to check on the boat, and then on Monday I started to get nervous. On a raft trip in 2007 I’d left my boat tied up in New Baltimore, and first the wind snapped its anchor line, then the tide washed it onto shore, then the police ticketed it, and then somebody cut its mooring lines as an intentional act of vandalism. So I made a point of getting up early and driving down to check on the boat on Monday morning.

If I’d gone down to check on the boat one day later, I wouldn’t have a boat to write about. I hadn’t thought to screw in cleats when we’d launched the boat, so I’d had to tie her to Jake’s dock by throwing climbing ropes around the bow and stern lines that connected the two canoes, and I tied one line to an oarlock and passed it through a cleat on Jake’s dock. When I drove to barren island and kayaked out to the dock, the boat was literally hanging by a threat. The line that had been tied through the oar lock had snapped the oarlock in half; the line tied around the bow had snapped; the one remaining line was chaffed and threatened to break at any moment. I retied the lines and ran home in order to get cleats to attach to the boat. This was the day of the solar eclipse, and as that was going on, I ran a long lead line behind my parent’s house, over the hill, stringing three 100-foot lines together, and carried up the electric drill. I used the drill to harvest the cleats and other hardware from the my old boat, Assembly Required, which I’d sailed from Albany to Manhattan in 2010, and which was now a pile of rotting wood and chipping fiberglass. I removed the hardware as the noise of the drill sent bees swarming and grasshoppers jumping all around me.

Neglect and sunlight does a lot of damage to a fiberglass boat over seven years.
A view inside the cabin of Assembly Required. She has plants growing up through her hull now. The plywood floor has completely rotted away.

I’d bought an inverter–a mechanism that you can hook up to a big battery like a car battery which converts the current from DC to AC so you can run appliances off of it. I brought this device, the drill and the cleats back to the river, kayaked out to the boat, brought the boat back to shore, and loaded them aboard. While I was doing this, several boats passed, and I saw why the ropes had snapped over the previous week. Jake’s dock is in shallow water, and when the wakes from the passing barges and powerboats hit the shallow water they grow in size. I watched as the wakes hit Jake’s dock and sent it and his sailboat bouncing violently. Meanwhile a couple of boats passed–I think one was Riverkeeper–and men stood with binoculars gazing at me. I managed to screw in one of the cleats, but the inverter kept beeping because the drill drew more power than the inverter could handle. So I got some of the cleats half-screwed in, then brought the boat back to the dock and tied new, stronger lines, directly around the boat’s frame. I decided I needed to come back to the boat on my next free morning (two days later, Wednesday the 23rd) with a cordless drill, to attach the cleats more securely.

Wednesday started, for me, at 6:30 a.m., because I had to go to traffic court in Delmar at 8 a.m., because I had a totally B.S. ticket for not counting to four at a stop sign coming off the Thruway in Selkirk, but I decided not to fight it if they gave me a plea, because it doesn’t matter if you’re guilty or innocent in a traffic violation, either you get found guilty or a lawyer finds some procedural error, and I didn’t feel like getting a lawyer. (As a side note–I can see how the process is very confusing to a person without experience in government–the Prosecutor appears to be a functionary of the court system, and when they call you into the room alone, it seems like a representative of the judge is speaking to you. I accepted the plea of parking on pavement, and then the prosecutor started lecturing me on the dangers of “blowing a stop sign.” I didn’t blow a stop sign, I stopped a stop sign behind a dump truck where I could see a quarter mile of highway in either direction, and I didn’t stop a second time, but drove onto Route 144 at 2 mph behind the dump truck. I must have had a look on my face because he stopped halfway through his sentence and said, “Well, I don’t need to lecture you,” and I felt like saying, “Yeah, you’re function here is to make sure that these BS tickets take the money out of my pocket and put them into the town coffers, let’s cut the pretend-moral-authority.”)

I drove back to my apartment and Katie and I drove down to New Baltimore. It was now eleven a.m. Katie worked with my mom toward making the signs which will be on either side of the boat reading “DALLASTROMBLEY.COM, Coming of Age on the Hudson.” I’d already cut and painted the boards on which the letters would be displayed, and my mom was using a high-end printer she got for Christmas to cut out the letters. Then we’d just have to tape them to the boards and they’d function as stencils.

IMG_0624 (A video of the printer at work)

As mom worked on the stencils, Katie and I drove to Barren Island with some one-inch boards, screws, and the cordless drill. The boat was still tied up fine when I kayaked out to the dock. We beached the boat on land and used the drill to put the five cleats in more tightly, so now we have the ability to tie up to docks quickly. Then we built the frame of a “cabin.” It’s basically a stick frame that we can unroll a canvas drop cloth on top of, and bungie it down, to make an 8-foot by 6-foot room which is 4-feet high. Larger than a tent, it will give us a place to ride out summer storms, and a place to hook lanterns and navigation lights.

By then it was past two p.m. so we had to pack it in. I retied the boat. We drove back to my parent’s house, where my mom was still working on the stencils. She offered to finish them, tape them to the boards, and give them the first coat of paint. I’ll check out the signs tomorrow. As of today she had a first coat.

Tomorrow (Friday morning, 6 days before launch) I’ll get up at 7:30 to go to Lowes for L-brackets, hinges, polyurethane, and 1-inch boards, then bring back two of my old marine batteries to NAPA and get three new ones (if you return a marine battery you don’t have to pay the NYS surcharge of $10), then go to Yanni’s to see about getting a boat slip for my book signing there are 9/1, then to the island to work on the boat for an hour, then to Uhaul to see about renting a trailer to bring the boat up to Troy before my trip, then clean up and head back to Albany for a 4:30-11:30 table waiting shift.

 

 

 

 

 

Grace and The Glory of Minutiae

We set our sights on grand goals–for me, the publication of a new book; my book tour down the Hudson Valley; ultimately, a “grand tour” of the U.S. though the Great Loop. But the great majority of our lives are filled with mundane minutiae. It’s hard not to lose motivation when the victories are so rare while the work is so frequent, unprofitable, and unacknowledged.

Toward achieving happiness we have choices. We can push our dreams and goals out of our minds in order to rid ourselves of the anxiety that comes with trying to attain them. (That strikes me as a pretty sad path). We can set goals and fight through the work that needs to be done, biting our lip and numbing our mind, while telling ourselves that the work will be over soon, and then our goal will be met. But over a timeline it seems like such a path would lead to an aggregate of annoyance for fleeting feelings of success. Or we can take what I think is the enlightened path, where we acknowledge that the minutia, the unacknowledged and unprofitable steps, are part of the whole experience of obtaining the goal, and try to enjoy those steps as part of the chosen experience.

Eleven years ago I read an essay in Farmer’s Almanac about Grace–a word I’d never really thought of before, especially in a secular sense. The author talked about how he used to loathe shoveling snow. As soon as the snow would pile up he’d get mad, then go out and rush through shoveling his driveway, taking the biggest shovelfuls he could lift in order to get back inside as quickly as possible. I remember he said that if you see your neighbor doing that, and you don’t like them, you should let them keep going on that way, because they’ll have a heart attack soon. (If you’re reading this blog I probably like you, which is why I’m trying to convince you not to act that way.) Anyhow one day the author of the essay was outside and suddenly he just had a change of opinion. He realized that picking up the heaviest scoops of snow didn’t get the driveway shoveled faster, because he tired himself out and had to rest. It also made his back hurt. Instead he started taking little scoops, and he stopped sweating, and then he stopped shivering. Then he wasn’t so uncomfortable or cold or achey. He looked around and noticed that it was actually quite beautiful outside as the snow fell. He realized he was getting exercise, which made him feel good about himself. He found himself even making little side paths just for the hell of it. After that, he didn’t look forward to snow falling, but he didn’t resent it either. He just acknowledged that when the snow fell, he had no choice but to go out and shovel it, and that he was equal to the task, so he might as well do it his way, enjoying what he could about it, because what possible benefit was there for him to deplore the idea of doing what he had to do before and while he was doing it? He called that Grace: doing what you have to do without complaining, in a mindful way, and even deriving some joy from what could otherwise be unpleasant. The essay struck me as really very wise, and for the last decade I’ve tried to follow the author’s advice. I think it’s helped me attain an aggregate of happiness that is far beyond what a  person feels if they don’t enjoy how they spend the majority of their time.

For example, last Wednesday was a pretty average day. I had a neat dream that made me think at 5:45, and since I drifted awake, I decided to get up and start living. (If you hate the idea of getting out of bed in the morning because you’re afraid you’ll run out of energy and get yelled at over the course of the day, you’re probably not living gracefully). So I got up and started doing my Fives, as I call them: I wash exactly five dishes, put away exactly five articles of clothes from my hamper, practice a melodic progression on the keyboard exactly five times, do five sit ups, five push ups, and read five pages of a book. None of those things are themselves very taxing, and over the course of the day, if I do my fives five times, I’ve done 25 sit ups and push ups, read 25 pages, learned a melodic progression, done my dishes and put away my clothes. I enjoy going from task to task, thinking about how my hands or stomach muscles feel, or what my mind is thinking as I read. I feel like I’m Here, Existing, which seems to me so much better than having my mind somewhere else because I’m daydreaming because I don’t like what I’m doing because I’m working for someone else’s profit just to get money.

After each set of Fives I do a task which is mundane or boring or irksome–the minutiae of everyday life. I was done with my first set of Fives at 6 a.m. and I updated my Excel spreadsheet which has my list of receipts for expenditures for my book business, including the cost of building my boat for my boat tour. I updated the list and it took about 15 minutes and I thought “Why did I think this was going to be so irksome? Because I had to open a drawer and look at receipts and type them into boxes?” I found that so far this year I’ve spent $1,409 to purchase copies of my book, build a model of my boat, and build the plywood deck. I would normally pay 30% of my income to taxes at the end of the year, so keeping track of this amount (which is tax deductible) will save me about $400. Not bad for 15 minutes worth of work. I did my next round of fives.

Now it was 6:45 and although I hadn’t done much, I had the satisfaction of knowing that I’d done a fair amount of “over-and-above” work before most people’s alarms had gone off. Next I set about re-formatting my new book, Siren Song, so that it will have a title page, a blank page, and then the page numbers would start on the first page with text. First I tried to figure out how to reformat the Word document by clicking on the drop boxes in the toolbar. I didn’t want to Google how to do it and have to find different answers and read them and click between the web browser and the document, reading and following the directions on a help page. But then I did, and discovered that you can divide a Word document into sections using the Headings tab, and number them independently. I made a section including two blank pages, then the title page (so that the title page would appear, like in a book, on the right-hand side after the reader flips one blank page, then an empty page on the left, so that the text would begin halfway down the middle of the next right hand page.) Then I had to Google how to delete the numbers from the first section (which was complicated). After completing and saving the formatting of the draft I signed into CreateSpace, the publishing website, and uploaded the file. They have a proof-reviewer after the document is uploaded. In reformatting the book I’d added an extra page after the title, so the text began on the left page after a full blank page after the title page. Etc. I edited and re-uploaded the draft six times, each time taking several minutes for the draft to upload. I began to wonder if I would get the draft finished before I had to set out for the day. With some luck, just after 8 a.m. (1 hour and fifteen minutes later) I got the document uploaded, the cover designed, and the whole package submitted for final review to the publishing outfit. Review takes 24 hours, and when the book is done I can publish it on Amazon and Kindle. (I have to charge $4.99 to make 84 cents per copy; I will be lucky if I sell 100 copies of the book, called Siren Song, about leaving my employment at the New York State Assembly. So this hour, added to maybe 300 other hours, will bring me in maybe $84. That comes out to about 28 cents per hour–though theoretically I could always sell more copies. (If it wasn’t for grace and patience I could never be a writer.)

By now it was a few minutes past 8 a.m. and I had to leave by quarter to nine to meet my friend Sam at Lowes to get some materials for finishing the construction of the deck of the new boat (which I will use for a book tour down the Hudson Valley in August). So I had about 35 minutes, which I used to edit and post a picture I’d taken two days earlier with Tess Collins, who runs McGeary’s and used to own the Lark Tavern, which was the best bar in Albany, and in which several scenes in my book are set. I emailed myself my picture, then realized it was in my “i-cloud”, but then I had to edit the picture and save it so I could post it on Facebook, and then I struggled trying to tag McGeary’s and the old Lark Tavern page (though it was easy to tag Tess)–so the post took 30 minutes–another piece of minutiae. But, as with the other minutiae that morning, it has the potential to be profitable: the post got 6 shares and 160+ likes, many from people who I do not know, through Tess’ page, who now know about the book. If five people buy the book as a result, I’ll earn $24.25, which isn’t bad for a half-hour’s worth of minutiae.

By 9 a.m. I’d driven to Lowes in Glenmont for the next step that no one will see when the boat is finished. I had to buy a piece of 15/32″ plywood, two 2X4s, 25 3-1/2″ bolts, nuts, washers and a 1/4″ drill bit. I didn’t have a way to transport the plywood with my 2001 Ford Taurus, but my friend Sam met me and we loaded it onto his car’s roof rack. By 9:50 we’d driven the materials to New Baltimore. By 10:10 we’d carried all of the materials out of my parent’s workshop, lined up the canoes, and put the parts of the deck together on top. So 4.5 hours after waking up, I could finally begin the physical work for the day. My goal was to build the bow of the deck, which, like the back portion of the deck, had to sit higher than the middle of the deck, in order to allow for the rise of the canoes at their bows and sterns.

We began by building a simple wooden square, which will be bolted to the center deck and extend between the canoes forward to support the foredeck.

The battery in the picture is keeping the square from falling off. The final boat will have a cable running from the bow of each canoe under the deck as a suspension support. For added support we cut two lengthwise beams running from the bow of each canoe back to the deck. These required a little math to make the correct cut at the front of each beam to allow for the “rise” of either canoe (the two canoes are different brands and rise at different angles.)

Next we built cross-wise braces, and then we screwed the plywood on top and cut it at angles in order to match the shape of the aft deck.

Here is a picture from the opposite angle:

The angles need to be cut and sanded into a prettier shape, but by now it was 1 p.m. and we had to take everything apart and store it in the work shed. By this point in the day I’d been up since 5:45 doing minutiae items and the only “progress” anyone besides me would observe was that I’d built a small front deck for my boat.

I drove back to Albany and slept from 2-3 p.m. before getting ready for work. I worked 4-9:45 and earned $168 dollars from the job that pays my actual bills. By the time I got home, my girlfriend was asleep (she works 8:30-5 in an office), so I kissed her goodnight, then worked on this blog post from 10:30 to midnight. I did not complete it but by midnight I was exhausted, and I wanted to get up by 7 a.m. the next morning, because there is always more work to do, so I went to sleep.

In the past, on boat projects like these, I’ve often felt overwhelmed. But in the past on boat projects like these I was working at the Assembly working 60+ hour weeks, whereas now I work about 32 hours per week. I’ve got a lot more flexibility in how I spent my time. But the main improvement is that nowadays I don’t think of my job, or driving to Lowes, or making expense reports, or cleaning, working out, reading or practicing piano as obligations. Rather, I’ve got hobbies and goals that I want to experience, and an experience includes all of the preparation. I often joke that at 32 years old I’m “semi-retired.” But if you go through your life gracefully performing the minutiae of daily life, it doesn’t seem like work, and since I don’t seem to be doing work, I do feel like I’m retired. Ironically I’m probably more productive now than I’ve ever been, but I feel like I’m playing around all day. So the point of this post is that you can really get a lot more pleasure from life if you own what you’re doing and don’t think of it as toil. Your moods become more even, you get more accomplished, time seems to last longer, you become proud of the miscellany you’ve finished, you’re more mindful, you sleep better…all of that adds up to being happier and healthier.

Working With My Dad

My dad is 68 years old. He was born in 1949. Harry S Truman was president when he was born. America was experiencing full employment, and thanks to the Marshall Plan, which funded rebuilding Europe after WWII, probably its widest world respectability.

My father grew up in Ravena, New York, a small town about 152 miles up the Hudson River from NYC, or 15 miles south of Albany. When he was a kid there were three bars, two restaurants, a hardware store, a pharmacy (where he and his mother worked), a roller skating rink, two churches and miscellaneous stores on Main Street. He went to elementary school on Main Street. His goal in life was to retire to Ravena where he had a front porch, so he could sit out most of the day and chat with  people he knew. But he moved to New Baltimore, where I grew up, in the woods. And it was a good decision because Main Street of Ravena is now a ghost town of broken windows and abandoned businesses.

The empty storefronts trigger my dad’s nostalgia. He and I both think of the decaying town like we would think of a bedridden friend. We used to park the car on Pulver Ave outside his old house, when I was in high school, and walk down Main Street, and chat with one another as a man and an adolescent.

Nowadays we’ve turned, my dad and I, the way a fruit discolors. There is no Main Street to fulfill his 40 year goal, and as a member of the modern generation, I feel bad, but can’t understand why he wasn’t cynical to begin with, since (today) nothing every turns out positively.

So last Monday I went to New Baltimore to work on my new boat, which I am hoping will be my ticket out of the cycle of broken down Main Streets. I left my apartment at 9 a.m and met my father at Lowes. I carried a list of materials which included 10 1X10″ boards, five 2X4s, four pieces of plywood, two gallons of paint, rollers, and four 2X4X16 foot boards. We loaded my dad’s truck with the plywood and 2X16s, which stuck out of the bed by eight feet, and he drove them to New Baltimore while I followed.

Dad and I, I don’t think you could describe us with any kind of cliche description. We are friends in addition to father and son. But not friends the way that Jared or Mike or Morgan and I are friends. Nor the way that Katie and I are friends and lovers and roommates. Dad is my fundamental roll model, and a very good one. But we are different people. I want to travel all over the world and teach myself piano, history, economics, literature, and law; Dad’s fundamental goal is to hang out with me, my sister, and my mom as a family as frequently as possible. He is like a neutron which has mass and therefore gravity, while I am like a proton which has significantly less gravity but charge. I sometimes envy electrons, which have movement and charge, but they are insubstantial, literally, and so I don’t emulate them. My father neither envies nor emulates electrons. He is certain in his gravity, and for him, rightly so.

We unloaded the truck, stacking the plywood and boards in front of the new garage he and Mom built in front of their driveway (which is newly paved). Since I didn’t want to clutter their front yard or detract from the improvements they are making to their home in their retirement, I stated matter of factly after he’d parked Dad’s truck,

“I guess we’ll have to carry these boards over the hill, past your house into the woods.”

But my father said, “Wouldn’t it be easier if we go up and get the canoes and bring them down here?”

Such a scenario saved several steps.

Dad’s second-hand F250 didn’t start, so he slid the shifter into neutral and backed through using his rearview mirror down the slope off the driveway where he’d parked. His truck doesn’t have license plates. He has offered to sell it to me for a dollar and keep it at his house if I pay the insurance, but I’m short on funds at the moment and trying to fund a boat.

I drove my Ford Taurus halfway down the driveway, popped the hood and attached the jumper cables. The truck started after Dad and I shot the shit for two or three minutes.

We drove up my parent’s law which is quite steep by the driveway, across a level yard about fifty yards wide, past their in-ground pool, down a ramp formed after my cousin poured concrete on a hill made of limestone rocks that served as a ramp to convey the truck to the next level of my parent’s property. My parents own eight acres of hills composed of shale expulsions covered in a mix of deciduous and coniferous flora. It is completely unproductive but quite picturesque. Down the first slope into the woods Dad parked, where my two canoes and speedboat, as well as several cords of wood and a 16-foot picnic table, are stacked along a precipice. I had to push his truck out of the mud when it got stuck.  We loaded my canoe into the bed. It dangled 8-feet over the tailgate. We lifted Mike’s canoe, carried it, and slid it on it’s side into the bed of the truck. Then we slid the lumber Mike and I had carried over the hill two days earlier. Dad drove the truck and the boards and canoes over his back yard and down the hill to beside the garage, leaving ruts in his yard, and then we unloaded everything in the grass.

I hadn’t planned for such cheerful help. I thought my parents would complain if I built my new boat within sight of their house. I figured I would have to spend at least an hour every time I worked on the boat running lead cords and carrying power tools and hardware to the workspace.  So my dad’s alacrity will save me probably a hundred man-hours over the course of my construction project. My father said,

“Okay Son, so what do we do now? I assume you want to take the canoes off first.”

“Well of course,” I said. “Let’s lay them approximately eight feet out from the outside of each canoe’s gunnels, which will approximate the diameter of the finished boat.”

“Ha, okay, you just grab the damn thing and tell me where to place it down.”

So we laid the canoes  eight-feet apart: the diameter of the finished boat.

Problem 1. We didn’t notice this until six days later, but each of the canoes has a kind of seam, running 1/2-inch deep from the bottom of its hull under its length the entire way, which makes the canoe cut straight through the water instead of sliding sideways. On the ground, the canoe would not balance on that line, but rested to either side so that the gunnels of the canoe (the uppermost part of it’s side walls), sat at an angle to the cross beams that connected the canoes. This made it difficult to lay the cross beams across the canoe to connect them.

(The last picture above is from a week later, after I’d given each canoe a coat of white paint.)

So we were standing in the driveway with a bunch of lumber and my sketches and the little model I’d build of the boat, and it was apparent that we had to change the plan.

I have to underscore that my father and I have never really worked on one of my boat projects together, though I’ve built seven boats over five years at a cost of $20,000 in his yards. I always worked with Mike or T.J. or Jared or Morgan or Oliver. When Dad and I worked together, we fell into arguments almost immediately. It was like we couldn’t just focus on the task at hand, but wrapped up in construction was the feeling that Dad didn’t really approve of my lifestyle living in an apartment in Albany instead of buying his and my mother’s house; that I wasn’t settling down and starting a family like he did; that I didn’t want to pursue a career like he did for the State. And also he is so extremely modest as to consider himself dumb when it comes to construction projects, which somehow annoyed me, because I am dumb when it comes to construction projects, but I found that if you just sit there and think of solutions you can create them. Anyhow we always argued before. But in the last six months our relationship has changed. His father and his best friend have passed away and I feel more empathy for him lately. Also I published my book last November, and I never thought he would read it (he’d never read a book in his life)–but he is the only person so far who has read the book cover to cover. There is a lot of tragedy in the book related to our family and to my former depression. Ever since he started reading my book our relationship has changed. He quotes little passages. It seems like the book really affected him, and that he empathizes with me too. It’s like between the book and the deaths he’s faced, we now treat each other as two equal male friends, with all the respect that that entails, rather than just father and son. Like we are working on this boat together because we like spending time together. Like we are friends. I’ve respected my father because of the setbacks he’s had to deal with, but now I feel respected, too. So instead of getting mad at not being able to follow my sketches and model step-by-step, we stood beside the two canoes with the four pieces of 2X4s stretched across unevenly, and considered what to do, together.

The original plan called for six 2X4s to run perpendicular to the canoes, connecting them together, and four 2X4X16-foot boards to run parallel to the canoes, on top of the crossbeams, to support the main deck, which would be composed of four pieces of plywood. This would create a boat that floated on two canoes and was eight-feet wide by 16-feet long. The deck would be built in two sections, each four-feet wide by 16-feet long, which would be connected at the river. I wanted the boat to be detachable so we could ship it to the river in pieces in the back of a pickup truck, because we don’t own a trailer.

Since neither of us are engineers, I decided we’d just build one-half of the deck and see what went wrong–something always goes wrong–so we could make a new plan from there. Over the course of seven hours we built one half of the deck.

Here the 2X4X16s are running parallel to the canoes on top of the 2X4 crossbeams, and the middle piece of plywood has been added. If you look closely you can see the next problem: each canoe is shaped like a banana. Where the bow and stern of each canoe rises, the plywood for the fore and aft deck could not be attached to the 16-foot beams. I’d planned to cut holes in the plywood deck to allow the bow and stern of each canoe to rise through the deck as a kind of aesthetic design–like a fin on an 1950s hotrod–but I couldn’t plan how to do it. And it didn’t help that my canoes are two different lengths. Dad suggested I cut the front into a T shape and cut the back through a series of larger and larger incisions until I cut a hole in the plywood that allowed the deck to lay flat on the 2X16 beams. But it ended up looking kind of shoddy.

Where the canoe protruded from the stern there was an asymmetrical cut; the front appeared unsupported; and the deck would not cover the entire canoe, so rain and waves would splash inside (where I plan to store my batteries and electrical equipment, as low and wide as possible, for ballast and convenience).

So I wasn’t really satisfied, but I felt that we had made progress insofar as we had tried plan B of the design, and now I can think about how to make improvements.

Thus ended Day 2 of work on my book-tour boat. This was a Monday, I drove to New Baltimore on Friday and painted both canoes with a first coat of white metallic paint (it will take at least three coats) and I planned to come back on Monday with a new work plan.